Tyco PC1565 Manuel d'utilisateur Page 1

InstructionManual• W A R N I N G •This manual contains information on limitations regarding product use andfunction and information on the limitations

88Ready LightIf the Ready light is ON, the system is ready for arming. Thesystem cannot be armed unless the Ready light is ON (see“Arming the System”

99The Liquid Crystal Display (LCD) displays promptsand system information on two 16 character lines.If “< >” appears, more information can be ac

10Zone BypassingThe zone bypassing function is used when access is needed to part of the protected area while thesystem is armed. Zones which are temp

11Additional Zone Bypassing FeaturesTo recall the last set of bypassed zones, press [✱][1][9][9]. Arm the system. The Bypass light will turn onto indi

12To view troubles from an LCD Keypad:From the Ready state, use the arrow (< >) keys to scroll to the following message.Press [✱] [2] key to vie

13From an LCD keypad, the following message will be displayed when each zone is activated...Use the arrow (< >) keys to view which zone is open.

14Downloading EnableTo enable a six-hour downloading window from any system keypad, enter [✱] [6] [Master code] [5].During this time, the panel will a

15Fire Escape PlanningThere is often very little time between the detection of a fire and the time it becomes deadly. It is thus veryimportant that a

16Avoiding False Alarms10 Points to Remember10 Points to Remember10 Points to Remember10 Points to Remember10 Points to Remember1. Make sure that the

Digital Security Controls Ltd.’s liability for failure to repair theproduct under this warranty after a reasonable number of attemptswill be limited t

WARNING Please Read CarefullyNote to InstallersThis warning contains vital information. As the only individual in contact withsystem users, it is your

© 2000 Digital Security Controls Ltd.Toronto, OntarioPrinted in Canada 29005121 R001

1About Your Security SystemYour DSC security equipment has been designed to provide you with the greatest possible flexibility andconvenience. Read th

2System InformationFill out the following information for future reference and store this manual in a safe place.Access CodesYour Master Code is:_____

3Access CodesAccess codes are used to arm and disarm the system. There are 37 access codes available: 1 mastercode, 32 regular access codes, 2 duress

4If this display is showing, the system is in the Ready state and may be fully armed. Toarm the system, enter your access code.Once the correct access

5Disarming the SystemDisarming from an LED Keypad:Enter the premises through a designated Exit/Entry door; entering by any other door will sound animm

6If An Alarm SoundsFire AlarmIf your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow youremergency evacua

7Additional CodesUp to 32 additional access codes (01 through 32) may be programmed.To program a new code:Enter [✱][5][Master Code][code number 01 to