Tyco Power832 Security System PC5016 Manuel d'utilisateur télécharger pdf (Page 8)

LCD5500 Keypad:

The Liquid Crystal Display (LCD) displays prompts and

system information on two 16 character lines.

If “< >” appears, more information can be accessed by

using the arrow (< >) keys. Press [<] to see the previous

function or item of information. Press [>] to advance the

display to next function or item of information.

Press the keys on the number pad as prompted by the

LCD display to view alarms or troubles, to arm and

disarm the system and to bypass zones.

To exit a function and return to the Ready state, press [#];

to select a function press [

✱].

NOTE: All functions can be performed from any LCD

keypad by using the LED keypad commands, as well

as by scrolling through the message display.

Important Note: Test system weekly and have any system

trouble conditions corrected by your alarm installer.

All Keypads:

Function Keys

(Stay, Away, Chime, Reset, Exit):

If activated by your installer, these

keys allow easy single button

activation of the most commonly used

features. For more information, talk to

your alarm installer.

PC5508, PC5516 and PC5532 Keypads:

Press the keys on the number pad to view alarms or troubles, to

Arm/Disarm the system or to bypass zones.

To exit, press [#]; to select a function, press [

✱].

Press both Keys for two seconds

to send a FIRE transmission.

Press both

Keys for two seconds

to send an AUXILIARY transmission.

Press both

Keys for two seconds

to send a PANIC transmission.

NOTE

(All Keypads)

: The Fire,

Auxiliary and Panic keys will NOT

function unless programmed by

the installer. If these keys are in

service and the installer has enabled

audible feedback, holding down the

key for two seconds will cause the

keypad sounder to beep indicating

that the input has been accepted and

transmission is underway.

Ready Light

(All keypads)

If the Ready light is ON, the system is

ready for arming.

If the Ready light is OFF, check to see

that all doors and windows are closed

and that all movement is stopped in

areas covered by motion detectors.

The system cannot be armed unless

the Ready light is ON indicating that all

zones are closed and the system is in

the Ready state.

Display Lights

Armed Light

(All keypads)

If the Armed light is ON, the system has

been armed successfully.

Trouble Light

(All keypads)

If the Trouble light is ON, check to see

what the trouble condition is and call

for service (See “Viewing Trouble

Conditions” on page 12).

Memory Light

(LED keypads only)

Upon disarming, if an alarm has

occurred while the system was armed,

the Memory light will turn ON (See

“Disarming the System” on page 6).

Bypass Light

(LED keypads only)

If the Bypass light is ON, ensure that

zones are intentionally bypassed

before arming the system (See “Zone

Bypassing”

on page 11).

PC5508 LED Keypad

The PC5508 and PC5516

Keypads are available for

applications with fewer than

32 zones. The functions

explained in this manual are

the same for all three LED

keypad types.

LCD5500 Keypad

Fire Light

(LED keypads only)

If the Fire light is ON, a fire alarm has

occurred (See “Fire Alarm Operation”

on page 14).

Program Light

(LED keypads only)

The Program light will flash you are

programming access codes, setting

the system time or performing other

programming functions. If someone is

programming at another keypad, the

Program light will turn ON to indicate

that the system is busy.

PC5516 LED Keypad

PC5532 LED Keypad

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Tyco Power832 Security System PC5016 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Tyco Power832 Security System PC5016